The woodworking shops consist of many tools which are essential for making wooden things like wood router, bits, measuring tape, sliding t bevel, level, etc. But one of the most important things that are like the backbone of the woodworking shop. Yes! It is the table saw. It is that tool around which most woodworking shops areWoodworking Marking and Measuring Tools built. If you want perfect ends cuts then the table saw is the wise choice for you. The table saw can cut sheets goods like ripping boards to narrow widths, plywood, mitered goods and many more.
Getting Started with the Table Saw
It is the most versatile tool but can be very dangerous at the same time, therefore it is good to know that how to use the table saw in the right way. But no need to worry about a minor issue, this article will help you to know about using it.
1. Use Safely
Safety measure is the first of all things when you are using any dangerous tool. Two of the most dangerous things that can occur while using a table saw are that your hand can be caught in the saw and having the board being kick back. So you be careful that where to stand while working with the table saw and where to keep your hands, these two things will help you to use the table saw safely and will reduce the risk of injury.
2. Tips and Tactics of your Table Saw
While working with the table saw, raise the blade in all ways and keep your grip over a combination square vertically against the table saw and the blade. Adjust your blade tilt according to necessity. Never ever use table saw rip fence for guidance in the purpose of cutting. The wood will be confined in between the fence and saw blade will give a serious hazardous kick back. Also, make sure to unplug the saw when squaring up the blade with drafting square.
Also Read: Woodworking Marking and Measuring Tools
3. Get most of your Table Saw
Table saw is a multi-tasking tool which can be used for many purposes rather than only ripping boards. If you have a jointer you can make a jig in which table will work as a jointer. It can also be used for box joints for drawer and finger joints. The jig can be used to straighten the edges of the boards using only the table saw.
4. Miter Gauge
The table saws consist of miter gauge for the making of angled cross cuts. The saw with good quality utilize a T-groove in saw’s table which helps to keep the miter gauge from coming out of the groove when in use. The miter gauge must be glide smoothly without losing and should be clearly marked for setting proper angle.
5. Rip Fence
When you are searching for the table saw, a fence is one of the most features to look for. The best quality fence remains parallel to the table saw no matter where it is positioned to the length of the table saw. Larger table saws have a T-style fence that is quite enough for ripping large stock very finely and smoothly. And is feasible for the woodworker to deal with it.
6. Dust Collection
Dust collection possibilities are necessary for all table saws. Some table saws are easier to clean as compare to others. Contractors saw is like one of the most difficult or worst to collect dust from. Hanging the shopper or bag on the open side of the saw and let the dust drop into it usually works, but there also many ways to block the back of the saw.
Also Read: How To Use A Table Saw
7. Woodworking tasks using Table Saw
Once you come to know much about the table saw, then you should apply those tips on woodworking projects. It can be used for miter cut, squares, dado, rabbet and it also gives shape to the edges of wood stock. So it can be useful for a woodworker to take such tasks with the table saw.
The table saw is considered as one of the most versatile and productive machines of the wood shop. This article will help you to know about the tips and tricks, safety measures and much more about the table saw which makes your woodworking shop more feasible to do the projects.
A good quality table saw is mostly equipped with the table from cast iron. The weight of cast iron helps the table saw to be stable. The table saw can be used in making tapered legs of chairs or furniture. In the past time, there was used a traditional method of tapered legs by cutting it with hands but now table saw is the versatile yet modern way of doing woodworking tasks. You’ll learn much through this article about the table saw!