Woodworking is an enjoyable hobby and can be a safe activity if you follow some precautions. So, are you a woodworker? Then you must be aware of the safety rules that should be kept in mind while working with the wood. Because adopting safety measures will turn this activity more fun-loving.
The protections that should be taken before woodworking are as follows:
1. Unfailingly Wear Safety Equipment
The first and most important rule of woodworking is wearing safety equipment. During usage of router wear eyeglasses, ear protection, wear latex gloves. Taking care of these things will be beneficial for you and your work will be more exciting and enjoyable. Find out the wood router reviews and it’s buying guide to help you find the best wood routers. You can also read our article “How To Use A Wood Router and Router Bits“.
2. Disconnect Power
Always remember to disconnect the power whenever you are changing the bit or blade of the router. Also, make sure there is no electricity powered to the tool. Many woodworkers do not take of this simple rule which results in serious injuries such as they cut their fingers or electric shocks can also be caused by it.
3. Avoid Alcohols and Drinks
Woodworking and alcoholic drinks can be the most dangerous combination you will ever witness. If you are under the influence of such alcohols so get out of the woodshop hurriedly as it will create panic for you and you will not be able to perform your task with full concentration. Be very keen and observant to your work so that you will have desirable results.
4. Never Use Blunt Tools
This rule is so obvious and important that how blunt tools can cause huge blunders in your work. Sharp blades and bits must be used during work because blunt tools need to work harder and can result in a bind or kickback.
Also Read: How to Install a Router Bit in Easy Way
5. Check the Existing Metals
Before starting your work make sure that the tool doesn’t have a piece of screw, nail or any other piece of metal. This will damage both the cutting head and the stock, also can cause a kickback which will result in serious injury.
6. Reduce Distraction
Distraction is the common cause of many issues in our every day’s activities. But working in a woodshop plus distraction can never be in the favor of woodworker. So while working with keeping all the things aside which create distractions and if you find anything creating panic just finish your work to a safe conclusion to avoid any inconvenience and for better result.
7. Wear Proper Clothes
Whenever you are working in the woodshop, make sure that you don’t wear loose-fitting clothes because it might be possible that it will entangle into a cutting head or a saw blade. Wear such type of clothes which are satisfying for you according to the environment and you work without any irritation. Also keep in mind to putt of pieces of jewelry, neck chains, bracelets or rings, etc.
8. Work Against the Cutter
The router should move against the direction not with it because woodworking marking and measuring tools are designed in a way that they required the direction of the piece of wood move through the tool.
9. Avoid putting your hands close to the cutter
It is always a wise decision to avoid keeping your hands near to the cutting blades when removing cutoffs. This rule is mandatory when you are especially working on a table saw, miter saw and other types of saws.
10. Use Single Extension Cord
A single extension cord can handle several types of equipment, in doing this you will be compelled to switch the cord from one to another tool before you use the tool. This will remind you to plug in and plug out the power when you will move from tool to tool. This will also keep you alert when you will make a blade or doing a bit changes.
11. Avoid reaching a running blade
Always wait for a spinning blade to stop before removing the blade or the waste or wait for it to move on the safe side. Remove the waste from a push stick or scrap piece so it will not harm your tool either you will face any damage in your router or your tool.
If you are working with wood but concerned about the safety measures then this article is surely for you. While working woodworker must sure that you follow the above-mentioned rules and regulations so that your work will be proper and results will be fruitful too. If you will neglect the rules work will not be fun loving and you will be irritated with all the confusions. Above mentioned rules will give you new ideas of working properly and these steps will have you to do injury free work. So, at the end follow the requirements and you’ll surely love your task!